Home / Service Areas / Maspeth

Whole-House Rewiring in Maspeth, Queens

Whole-house rewiring in Maspeth, Queens is core work for Queens House Rewiring, in a settled neighborhood of mid-century homes. The attached and detached houses here were often built with aluminum branch wiring and 100-amp services that need attention today. We remediate or replace the aluminum, rewire circuits in grounded copper, and upgrade services to 200 amps. Maspeth homeowners bring us in when the wiring in a solid mid-century home has to be made safe and inspection-ready.

About Maspeth

Maspeth is a quiet, working residential neighborhood of mid-century attached and detached brick homes tucked between Newtown Creek and the surrounding industrial edges of western Queens. Many of these post-war houses were built with aluminum branch wiring and fitted with 100-amp services that are now undersized and a fire risk at the connections. That housing stock makes aluminum remediation and service upgrades some of the most common electrical work here.

Aluminum Branch Wiring Remediation

The mid-century homes in Maspeth were often wired with aluminum branch circuits that loosen and overheat at outlets and switches, a documented fire risk. We remediate the connections with listed CO/ALR devices or copper pigtails, or replace the aluminum runs with copper where the risk warrants it. A master electrician judges which is right after inspecting the wiring.

100-Amp to 200-Amp Service Upgrades

The 100-amp services common here fall short of modern loads once central air, an EV charger, or an updated kitchen is added. We upgrade the service entrance and install a 200-amp breaker panel with room for dedicated circuits, all permitted and inspected. On larger detached homes we size the service to leave headroom for the future.

Full Rewiring for Attached and Detached Homes

When a home's wiring is too old or too compromised to remediate piecemeal, we rewire it end to end. We run grounded copper NM cable to every circuit, install code-required GFCI and AFCI protection, and tie it all into a new panel. We plan the runs so the finished system is clean and correct.

Frequently Asked

Do I have to replace all the aluminum wiring in my Maspeth home?
Not always. Where the runs are sound, we remediate the connections with listed CO/ALR devices or copper pigtails; where the risk is higher, we replace the aluminum with copper. A master electrician recommends the right approach after inspecting it.
Can you upgrade my 100-amp service to 200 amps?
Yes. We upgrade the service entrance and install a 200-amp breaker panel with room for dedicated circuits and EV charging, all permitted and inspected, which is common work on the neighborhood's homes.

We also rewire homes in nearby Middle Village. Call Queens House Rewiring at (718) 649-1442 for whole-house rewiring & electrical across Queens.

Call (718) 649-1442Quote